Blogs

Several leak detection methods, that are deterministic and non-destructive, are already available in the market. Pharmaceutical companies are urged to use technologies that significantly enhances quality assurance and leak detection rates. Appropriate leak detection technology is selected based on the specific characteristics of the product and container, such as conductivity, headspace parameters, contents, or API. Historically, dye immersion and microbial immersion have been the two main methods of vial integrity testing. Recently, the USP has issued guidelines that require critical methods to achieve more reproducible and predictable outcomes. USP <1207> encourages a move towards more deterministic methods, recommending the avoidance of dye immersion tests and the use of quantitative, non-destructive technologies instead.

Why High Voltage Leak Detection Method is Preferred for Testing Vials?

High Voltage Leak Detection or HVLD is a deterministic, non-destructive leak detection method to evaluate vials, cartridges, and other liquid-filled parenteral products for Container Closure Integrity. The current generation of PTI’s MicroCurrent HVLD may be utilized with a wide range of liquid-based products, from low conductivity sterile water for injection to highly proteinaceous drug preparations in suspensions. It is one of the most effective online container closure testing methods, requiring just minor infrastructure modifications. When compared to conventional HVLD solutions, MicroCurrent HVLD utilizes approximately 50% less voltage and exposes the product and environment to less than 5% of the voltage. This method is non-invasive and requires no sample preparation. Like vial leak testing, another major application of MicroCurrent HVLD is pre-filled syringe testing.

Working Principle of MicroCurrent HVLD Technology

In this method, the container is scanned using a set of high voltage electrode probes. A high voltage is applied to one side of the container, while a ground probe is attached to the other. If there is no leak in the package, the two container walls (high voltage side and ground side) offer complete electrical resistance, and no substantial current is measured flowing through the vial. If a micro-leak or fracture occurs in one of the container walls, the break-down resistance is achieved, and the current flows through. HVLD is the only leak detection method that does not require mass to travel through a defect location, instead of requiring just electricity to pass through a crack. Because of this feature, HVLD is sensitive to leaks that conventional leak detection technologies are unable to detect.

MicroCurrent HVLD Technology Advantages

• Deterministic and non-destructive test method.
• High level of repeatability and accuracy.
• Ensure more accuracy and dependability in results.
• At high production rates, both offline and 100% online inspections are performed.
• Simplifies the inspection and validation procedure.
• Highly effective in all parenteral preparations, even liquids with extremely low conductivity (WFI).
• Outlined in the USP 1207 Guideline.

Pharmaceutical containers like vials protect the product from contamination (sterile barrier) and prevent changes in product quality caused by external factors. In order to determine the functionality of such systems, container closure integrity testing is performed. CCIT provides sophisticated analytical methods for evaluating pharmaceutical containers.